Compex SGX3226 Spécifications télécharger pdf (Page 40)

Chapter 5 Web-based Interface Configuration for Compex SGX3226

When to use Port–Forwarding Virtual Server

When your ISP assign you with only one fixed Public IP address, and you

want to define the various servers (such as, FTP, HTTP, Netmeeting, Mail

server etc) to specific Private IP address in your LAN; hence, you can

choose to host the servers by using the Port-Forwarding Virtual server.

Example, suppose that you have a FTP Server with an IP address of

192.168.168.41. And your broadband ISP has assigned a Public IP address

of 203.120.12.100 to the gateway. To support a Web Server in your Private

Network, you need to define an NAT Static Port-based Entry to forward

TCP port 21 (used by FTP) to 192.168.168.41. Every http://203.120.12.100

requests will then be forwarded to the FTP Server.

Follow the steps shown below to configure Static Port.

1. Go to NAT function at the Command Window. Select the type of

Server you wish to configure as shown in the figure below:

2. Key in the Private IP Address.

3. Next, choose a transport protocol, either TCP or UDP, for the

respective IP Address.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 89 90

Pas de commentaire

Compex SGX3226 Spécifications Page 40